FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does the oil pressure light come on in my Volvo XC90 Second Generation (2015-2024) - Volvo XC90
Home/Cars/Volvo/XC90/Second Generation (2015-2024)/why does the oil pressure light come on in my Volvo XC90 Second Generation (2015-2024)

why does the oil pressure light come on in my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
533 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the oil pressure light issue in your Volvo XC90 (2015-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before performing any maintenance to avoid burns.

Symptoms

  • •Oil pressure warning light illuminated on the dashboard
  • •Engine makes unusual noises (ticking or knocking)
  • •Oil leaks visible under the vehicle
  • •Decreased engine performance or responsiveness
  • •Engine overheating

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oil pressure gauge
  • •Socket set
  • •Oil filter wrench
  • •Torque wrench

Parts Required

  • •Engine oil (correct viscosity)
  • •New oil filter
  • •Oil pressure sending unit (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a level surface and the engine is cool.
  • Disconnect the battery to avoid any electrical issues.
2. Check and Replace Oil
  • Sub-steps:
    1. Remove the oil filler cap and check the oil level with the dipstick.
    2. If the oil level is low, add the correct viscosity oil (refer to owner’s manual).
    3. If changing oil, drain the old oil using a socket set to remove the drain plug.
    4. Replace the oil filter using an oil filter wrench.
    5. Fill the engine with new oil, ensuring it meets the specifications.
3. Inspect and Replace Oil Pressure Sending Unit
  • Sub-steps:
    1. Locate the oil pressure sending unit (usually near the oil filter).
    2. Disconnect the electrical connector from the sending unit.
    3. Remove the sending unit using a socket or wrench.
    4. Install the new sending unit and tighten to manufacturer's specifications (usually around 15-20 ft-lbs).
    5. Reconnect the electrical connector.
4. Test Oil Pressure
  • Sub-steps:
    1. Remove the oil pressure sending unit again.
    2. Install an oil pressure gauge into the port.
    3. Start the engine and observe the oil pressure readings. They should be within the manufacturer’s specified range.
    4. If readings are low, further investigation into the oil pump or internal engine components may be necessary.