FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volvo XC90's check engine light and oil light are on, what does it mean? - Volvo XC90
Home/Cars/Volvo/XC90/Second Generation (2015-2024)/my Volvo XC90's check engine light and oil light are on, what does it mean?

my Volvo XC90's check engine light and oil light are on, what does it mean?

Volvo XC90 Second Generation (2015-2024)

Error Codes
1-3 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix check engine and oil light issues in your Volvo XC90. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow the engine to cool before opening the oil filler cap or draining oil.

Symptoms

  • •Check engine light illuminated
  • •Oil pressure warning light activated
  • •Possible rough engine idle
  • •Reduced engine performance or power loss
  • •Increased engine noise
  • •Engine may stall or hesitate

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Oil pressure gauge
  • •Socket set
  • •Oil filter wrench
  • •Oil pan

Parts Required

  • •Engine oil
  • •Oil filter
  • •Oil pressure sensor (if faulty)

Additional Information

Affected Component
Engine
Estimated Time
1-3 hours
Difficulty
medium
Severity
high
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to prevent any electrical issues while working.
2. Check Oil Level and Change Oil (if necessary)
  • Sub-steps:
    • Remove the dipstick and wipe it clean.
    • Reinsert the dipstick and remove it to check oil level.
    • If oil is low or dirty, drain the old oil using an oil pan.
    • Replace the oil filter using an oil filter wrench.
    • Refill the engine with the manufacturer-recommended oil type and quantity.
3. Address Any Identified Faults
  • Sub-steps:
    • If error codes indicate a specific sensor fault, replace the faulty sensor (e.g., oil pressure sensor).
    • If an oil leak is found, locate the source (such as gaskets or seals) and replace as necessary.
    • If the oil pressure gauge reads low, inspect the oil pump and replace it if faulty.
4. Reconnect Battery and Clear Codes
  • Sub-steps:
    • Reconnect the battery terminals securely.
    • Use the OBD-II scanner to clear any stored error codes from the system.