FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Volvo XC90 Second Generation (2015-2024) traction control light is on what should I check - Volvo XC90
Home/Cars/Volvo/XC90/Second Generation (2015-2024)/my Volvo XC90 Second Generation (2015-2024) traction control light is on what should I check

my Volvo XC90 Second Generation (2015-2024) traction control light is on what should I check

Volvo XC90 Second Generation (2015-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
503 words

Problem Statement

Learn how to diagnose and fix the traction control light issue in a 2015-2024 Volvo XC90. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the hood.

Symptoms

  • •Traction control light illuminated on the dashboard
  • •Poor traction in slippery conditions
  • •Vehicle may exhibit unintended acceleration or braking
  • •Reduced engine power under slippery conditions
  • •ABS light may also be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Torque wrench
  • •Brake cleaner

Parts Required

  • •Wheel speed sensors (if found faulty)
  • •Brake fluid (DOT 4)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: OBD-II scanner, multimeter, socket set, torque wrench, brake cleaner.
  • Disconnect the battery to prevent any electrical issues.
  • Allow the vehicle to cool down if it has been recently driven.
2. Scan for Error Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Record any error codes related to the traction control system for further analysis.
  • Clear the codes and see if they return after a test drive.
3. Inspect Wheel Speed Sensors
  • Locate the wheel speed sensors at each wheel hub.
  • Remove any debris or dirt from the sensor area.
  • Use a multimeter to test the resistance of each sensor; it should be within the manufacturer’s specifications.
  • Replace any faulty sensors as needed.
4. Check Brake Fluid Level
  • Open the hood and locate the brake fluid reservoir.
  • Inspect the fluid level and ensure it is within the recommended range.
  • If low, top off with the specified brake fluid type (DOT 4 for most Volvo models).
5. Examine ABS Module and Wiring
  • Locate the ABS module, typically found near the brake master cylinder.
  • Inspect for any visible damage or leaks.
  • Check all wiring and connectors for signs of wear or corrosion.
  • Repair or replace any damaged components as necessary.