how to reset the service light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

2 min read

391 words

Problem Statement

Learn how to reset the service light on your Volvo XC90 (2015-2024) with this step-by-step guide. Ensure your maintenance reminders are cleared.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing any procedures.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder notifications displayed
•Engine oil change or service due message present
•Engine performance issues may arise if service is not completed

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the 'Trip' or 'Reset' button on the instrument cluster.
4
Press and hold the 'Trip' button until the service light begins to flash, then release it.
5
Wait for the service indicator to reset, typically indicated by a confirmation message or the light turning off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Volvo key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Locate the 'Trip' or 'Reset' button on the instrument cluster.
4
Press and hold the 'Trip' button until the service light begins to flash, then release it.
5
Wait for the service indicator to reset, typically indicated by a confirmation message or the light turning off.

Solution

1. Preparation

Gather necessary tools: a Volvo key fob.
Ensure the vehicle is parked safely and is in the "OFF" position.

2. Turn on Ignition

Insert the key into the ignition or have the key fob inside the vehicle.
Turn the ignition to the "ON" position without starting the engine.

3. Reset Service Light

Locate the "Trip" or "Reset" button on the instrument cluster.
Press and hold the "Trip" button until the service light begins to flash.
Release the button, and wait for the service light to reset, which is confirmed when the light turns off or a confirmation message appears.

4. Turn Off Ignition

Turn the ignition back to the "OFF" position.
Remove the key from the ignition (if applicable).