how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)?

Volvo XC90 Second Generation (2015-2024)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

375 words

Problem Statement

Learn how to reset the oil change light on your 2015-2024 Volvo XC90. Follow our step-by-step guide for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and on a level surface before performing the reset.

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds while the key is in the 'On' position.
4
Turn the ignition off and remove the key.
5
Start the engine to verify if the oil change light has been reset.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'Off' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn to the 'On' position without starting the engine.
3
Press the gas pedal three times within 10 seconds while the key is in the 'On' position.
4
Turn the ignition off and remove the key.
5
Start the engine to verify if the oil change light has been reset.

Solution

1. Preparation

2. Resetting the Oil Change Light

Turn on the Ignition
- Insert the key into the ignition or press the start button without pressing the brake pedal.
- Turn the ignition to the "On" position (do not start the engine).
Press the Gas Pedal
- Quickly press the gas pedal three times within 10 seconds.
Turn Off the Ignition
- Turn the ignition back to the "Off" position and remove the key.
Verify Reset
- Start the engine and check if the oil change light is turned off.