how to reset the oil change light on my Volvo XC90 Second Generation (2015-2024)

Volvo XC90 Second Generation (2015-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

327 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 (2015-2024) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing this procedure.

Symptoms

•Oil change light illuminated on the dashboard
•Warning message indicating maintenance required
•Oil change reminder notification

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position with keys removed from the ignition.
2
Insert the key into the ignition and turn it to the 'RUN' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition back to the 'OFF' position.
5
Start the engine and check if the oil change light is off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position with keys removed from the ignition.
2
Insert the key into the ignition and turn it to the 'RUN' position without starting the engine.
3
Press the gas pedal three times within 10 seconds.
4
Turn the ignition back to the 'OFF' position.
5
Start the engine and check if the oil change light is off.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the engine off.

2. Access the Ignition

Insert the key fob into the ignition slot.
Turn the ignition switch to the "RUN" position without starting the engine.

3. Reset the Oil Change Light

Quickly press the gas pedal three times within 10 seconds.
Ensure the pedal is fully pressed each time for the reset to register.

4. Confirm the Reset

Turn the ignition back to the "OFF" position.
Start the engine to verify that the oil change light has been reset and is no longer illuminated.