how to reset the oil change light on my Volvo XC90

Volvo XC90 Second Generation (2015-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 with this step-by-step guide. Ensure your vehicle is properly maintained and running efficiently.

Affected Component

Engine

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode before performing the reset to avoid unintended movement.

Symptoms

•Oil change light illuminated on the dashboard
•Possible message display indicating 'Oil Change Required'
•Engine may run with suboptimal oil levels (if not addressed)
•Potential reduction in fuel efficiency (if oil change is overdue)

Diagnostic Steps

1
Confirm the vehicle has received an oil change if the light is on.
2
Ensure the ignition is in the 'OFF' position.
3
Locate the odometer display on the dashboard.
4
Turn the ignition key to the 'ON' position without starting the engine.
5
Observe the oil change light status during the reset procedure.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob
•Odometer display access

Parts Required

•None for resetting; ensure proper oil and filter for future changes.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools:
- Ignition key or key fob
- Odometer display access
Ensure the vehicle is parked on a level surface and in "Park" mode (for automatic transmissions).

2. Resetting the Oil Change Light

Turn the ignition to the "OFF" position.
Press and hold the trip odometer reset button (located on the dashboard).
While holding the reset button, turn the ignition to the "ON" position (do not start the engine).
Continue to hold the reset button until the oil change light flashes and then turns off (this may take about 10 seconds).
Release the reset button.
Turn the ignition back to the "OFF" position and then start the engine to verify that the oil change light is no longer illuminated.