how to reset the oil change light on my Volvo XC90?

Volvo XC90 Second Generation (2015-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

366 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC90 with this easy step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Oil change light remains illuminated on the dashboard
•Maintenance reminder message displayed
•Engine oil has been changed but warning light persists

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key or press the ignition button to the 'RUN' position without starting the engine.
3
Locate the 'RESET' button on the instrument cluster.
4
Press and hold the 'RESET' button until the oil change light begins to blink.
5
Release the button, then press it again briefly to confirm the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset procedure.

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key or press the ignition button to the 'RUN' position without starting the engine.
3
Locate the 'RESET' button on the instrument cluster.
4
Press and hold the 'RESET' button until the oil change light begins to blink.
5
Release the button, then press it again briefly to confirm the reset.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Make sure all doors are closed.
Have the owner's manual handy for reference if needed.

2. Turn on the Ignition

Insert the key into the ignition or press the start button.
Turn the ignition to the "RUN" position without starting the engine.

3. Access the Reset Function

Locate the "RESET" button on the dashboard, which is usually found near the odometer or instrument cluster.

4. Perform the Reset

Press and hold the "RESET" button until the oil change light blinks.
Release the button and press it once more to finalize the reset.
Wait for the confirmation that the light has been reset (it should turn off).