FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Volvo XC90 First Generation (2002-2014) - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/how to reset the maintenance light on Volvo XC90 First Generation (2002-2014)

how to reset the maintenance light on Volvo XC90 First Generation (2002-2014)

Volvo XC90 First Generation (2002-2014)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
379 words

Problem Statement

Learn how to reset the maintenance light on a 2002-2014 Volvo XC90. Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode before performing the reset to avoid unintentional movement.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder message displayed on the instrument cluster
  • •No other engine performance issues or warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: no special tools are typically required, but ensure you have the vehicle key.
  • Make sure the vehicle is parked on a level surface and in "Park" mode.
2. Reset Maintenance Light
  1. Turn on Ignition: Insert the key into the ignition and turn it to the "Run" position (do not start the engine).
  2. Press and Hold Odometer Button: Locate the odometer reset button on the dashboard. Press and hold this button.
  3. Cycle the Ignition: While holding the odometer button, turn the ignition off and then back to the "Run" position again.
  4. Release Odometer Button: Continue holding the odometer button for about 10 seconds until the maintenance light begins to flash and then turn off.
  5. Confirm Reset: Release the odometer button and turn off the ignition. Start the vehicle to ensure the maintenance light is no longer illuminated.