FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Volvo XC90 First Generation (2002-2014) - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/how to reset the maintenance light on my Volvo XC90 First Generation (2002-2014)

how to reset the maintenance light on my Volvo XC90 First Generation (2002-2014)

Volvo XC90 First Generation (2002-2014)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
281 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC90 First Generation (2002-2014) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle has undergone maintenance services recently

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and ensure the vehicle is parked safely.
  • Ensure the ignition key is available.
2. Turn on Ignition
  1. Insert the ignition key and turn it to the "II" position without starting the engine.
  2. Wait for the dashboard lights to illuminate.
3. Reset the Maintenance Light
  1. Fully depress the gas pedal three times within five seconds.
  2. Turn the ignition key back to the "OFF" position.
4. Verify the Reset
  1. Start the engine to confirm that the maintenance light is no longer illuminated.