FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light on my Volvo XC90 First Generation (2002-2014)? - Volvo XC90
Home/Cars/Volvo/XC90/First Generation (2002-2014)/how do I reset the maintenance light on my Volvo XC90 First Generation (2002-2014)?

how do I reset the maintenance light on my Volvo XC90 First Generation (2002-2014)?

Volvo XC90 First Generation (2002-2014)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
402 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC90 First Generation (2002-2014) with this step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and the engine is off before beginning the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Warning message displayed regarding service due
  • •No other performance-related symptoms typically associated with mechanical issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No special tools required.

Parts Required

  • •No parts required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: no specific tools are required for this reset.
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Resetting the Maintenance Light
  1. Sit in the driver’s seat and ensure all doors are closed.
  2. Insert the key into the ignition and turn it to the "II" position (dashboard lights should illuminate).
  3. Check that the odometer reading is displayed; if necessary, toggle to the odometer using the trip button.
  4. Press and hold the "Trip" button located on the instrument cluster.
  5. While holding the "Trip" button, turn the ignition off and then back on to the "II" position.
  6. Keep holding the "Trip" button until the maintenance light begins to flash, then goes off (this may take about 10 seconds).
  7. Release the "Trip" button and turn the ignition off again.