what should I do if my Volvo XC60 536 (2017-Present) remote start doesn't work?

Volvo XC60 536 (2017-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

473 words

Problem Statement

Learn how to diagnose and fix the non-functional remote start in a 2017-Present Volvo XC60 536. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park before attempting to use remote start.

Symptoms

•Remote start button does not respond when pressed
•Check engine light illuminated
•Vehicle does not start or crank upon remote activation
•Key fob battery may be low or dead
•Security system warning light may be flashing

Diagnostic Steps

1
Check the battery in the key fob for charge and proper function.
2
Ensure the vehicle is in the correct mode (e.g., park or neutral) for remote starting.
3
Scan the vehicle's OBD-II system for any error codes related to the remote start feature.
4
Verify that the remote start function is enabled in the vehicle settings menu.
5
Inspect the car's security system for any fault indicators or malfunctioning components.
6
Test the remote start feature using a spare key fob if available.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Small flathead screwdriver

Parts Required

•CR2032 key fob battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery in the key fob for charge and proper function.
2
Ensure the vehicle is in the correct mode (e.g., park or neutral) for remote starting.
3
Scan the vehicle's OBD-II system for any error codes related to the remote start feature.
4
Verify that the remote start function is enabled in the vehicle settings menu.
5
Inspect the car's security system for any fault indicators or malfunctioning components.
6
Test the remote start feature using a spare key fob if available.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked in a safe location and that the ignition is off.

2. Check Key Fob Battery

Remove the key fob cover using a small flathead screwdriver.
Replace the CR2032 battery with a new one, ensuring correct polarity.
Reassemble the key fob and test the remote start function.

3. Inspect Vehicle Settings

Start the vehicle using the ignition key.
Navigate to the settings menu on the infotainment system.
Locate the remote start feature and verify that it is enabled.
Adjust settings as necessary and save changes.

4. Scan for Error Codes

Connect an OBD-II scanner to the vehicle’s diagnostic port.
Turn on the ignition without starting the engine.
Read and record any error codes that may indicate issues with the remote start system.
Clear the codes and attempt to use the remote start function again.

5. Security System Inspection

Inspect the vehicle's security system for fault indicators.
Check for any blown fuses related to the remote start feature; replace if necessary.
Reset the security system if possible, following the manufacturer's instructions.