Volvo XC60 536 (2017-Present) steering column makes clicking noise, what to do

Volvo XC60 536 (2017-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

452 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the clicking noise in the steering column of your 2017-present Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid short circuits.
•Ensure the vehicle is on a flat surface and securely supported if lifting is necessary.

Symptoms

•Clicking noise when turning the steering wheel
•Loose or unresponsive steering feel
•Steering wheel vibrations
•Difficulty in steering at low speeds
•Possible warning lights on the dashboard

Diagnostic Steps

1
Inspect the steering column for visible signs of wear or damage.
2
Check for loose bolts or fasteners in the steering assembly.
3
Use an OBD-II scanner to check for any related error codes.
4
Examine the steering linkage and joints for play or damage.
5
Test the power steering fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Screwdriver set
•OBD-II scanner

Parts Required

•Replacement bolts or fasteners (if necessary)
•Steering column components (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools: socket set, torque wrench, screwdriver set, and lubricant.
Disconnect the battery to ensure safety while working on the steering system.
Allow the vehicle to sit for a few minutes to cool down if it has been running.

2. Remove Steering Column Covers

Use a screwdriver to remove screws securing the lower and upper steering column covers.
Carefully detach the covers to expose the steering components.

3. Inspect Steering Components

Visually inspect the universal joint and bearings for wear.
Check the clock spring for any signs of damage or misalignment.
Ensure that all bolts and fasteners associated with the steering column are tight and secure.

4. Address Loose Components

Tighten any loose bolts or fasteners to the manufacturer’s torque specifications.
If any components are found damaged or worn, replace them as necessary.

5. Reassemble Steering Column

Reattach the steering column covers using the removed screws.
Ensure all components are aligned and functioning properly before securing them.

6. Reconnect Battery

Reconnect the battery terminals, ensuring a secure connection.