how to reset the oil light on Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

384 words

Problem Statement

Learn how to reset the oil light on your 2017-present Volvo XC60. Step-by-step guide to ensure your vehicle is properly maintained.

Affected Component

Engine

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode and the engine is off before starting the reset procedure.

Symptoms

•Oil light illuminated on the dashboard
•Possible warning message regarding oil change
•No other symptoms affecting vehicle performance

Diagnostic Steps

1
Ensure that the oil has been changed and the oil filter has been replaced.
2
Insert the key fob into the ignition or press the start button (without starting the engine).
3
Navigate to the vehicle settings on the dashboard display using the control knob.
4
Select the 'My Car' option or equivalent menu.
5
Choose the 'Service' or 'Oil' submenu.
6
Look for the 'Oil Change' or 'Reset Oil Light' option and select it.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•No parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure that the oil has been changed and the oil filter has been replaced.
2
Insert the key fob into the ignition or press the start button (without starting the engine).
3
Navigate to the vehicle settings on the dashboard display using the control knob.
4
Select the 'My Car' option or equivalent menu.
5
Choose the 'Service' or 'Oil' submenu.
6
Look for the 'Oil Change' or 'Reset Oil Light' option and select it.

Solution

1. Preparation

Gather the necessary tools (if any) to access the vehicle's dashboard settings.
Ensure that the vehicle is in a safe location with the engine off.

Insert the key fob and turn it to the "On" position or press the start button once.
Use the control knob located on the center console to navigate through the dashboard display.

3. Reset the Oil Light

Select the “My Car” option from the dashboard menu.
Navigate to the “Service” or “Oil” submenu.
Find the “Reset Oil Light” option and select it.
Confirm the reset when prompted on the screen.

4. Verify the Reset

Turn off the ignition and then restart the vehicle.
Check if the oil light has extinguished on the dashboard.