FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil change light on my Volvo XC60 536 (2017-Present)? - Volvo XC60
Home/Cars/Volvo/XC60/536 (2017-Present)/how to reset the oil change light on my Volvo XC60 536 (2017-Present)?

how to reset the oil change light on my Volvo XC60 536 (2017-Present)?

Volvo XC60 536 (2017-Present)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
383 words

Problem Statement

Learn how to reset the oil change light on your Volvo XC60 536 (2017-Present) with this quick and easy guide. Step-by-step instructions included.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always ensure the vehicle is in park or neutral with the parking brake engaged when performing ignition-related procedures.

Symptoms

  • •Oil change light illuminated on the dashboard
  • •Notification for maintenance due displayed
  • •Inability to clear the oil change reminder through standard driving

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools required.

Parts Required

  • •No parts required for the reset.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for the reset.
  • Ensure the vehicle is in a safe and well-ventilated area.
2. Ignition Position
  • Insert the key or press the start button to turn the ignition to position II (do not start the engine).
  • This prepares the system for the reset process.
3. Reset Procedure
  • Fully press the gas pedal three times within a span of 10 seconds.
  • Make sure to press it all the way down for each press to ensure the system recognizes the input.
4. Turn Off Ignition
  • After the three presses, turn the ignition off completely.
5. Verify the Reset
  • Turn the ignition back to position II again and check the dashboard.
  • Ensure that the oil change light is no longer illuminated.