how to reset the oil change light on a Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

360 words

Problem Statement

Learn how to reset the oil change light on a 2017-Present Volvo XC60 (model 536) with this step-by-step guide. Ensure your maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' mode before beginning the reset process.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder indicating oil change is due
•Vehicle displays 'Service Required' message

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'OK' button on the steering wheel to access the trip computer.
3
Scroll through the options until reaching the 'Settings' menu.
4
Select 'Service' from the settings menu.
5
Choose 'Reset Oil Change Light' option.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key

Parts Required

•None required for resetting the oil change light

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the ignition key ready to access the vehicle's electrical system.

2. Access Ignition and Trip Computer

Insert the ignition key and turn it to the "ON" position (do not start the engine).
Locate the "OK" button on the left side of the steering wheel.
Press the "OK" button to activate the trip computer screen.

3. Navigate to Settings

Use the arrow buttons on the steering wheel to scroll through the options.
Find and select the "Settings" option using the "OK" button.

4. Reset the Oil Change Light

Within the settings menu, scroll to "Service."
Select "Reset Oil Change Light."
Confirm the reset when prompted by pressing the "OK" button again.

5. Final Steps

Turn off the ignition.
Start the engine to ensure that the oil change light is no longer illuminated.