how to reset the maintenance light on Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

385 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 (2017-present) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing any resets to avoid distractions.

Symptoms

•Maintenance light illuminated on the dashboard
•Message indicating 'Service Required' or similar
•No other performance issues affecting the vehicle

Diagnostic Steps

1
Sit in the driver's seat and ensure the vehicle is in the 'off' position.
2
Insert the key fob into the ignition or press the START button without pressing the brake pedal (to enter the 'ACC' mode).
3
Locate the 'OK' button on the right side of the steering wheel.
4
Navigate using the left scroll wheel or buttons on the steering wheel to access the 'Settings' or 'My Car' menu on the dashboard display.
5
Select 'Service' or 'Maintenance,' then look for the option to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Sit in the driver's seat and ensure the vehicle is in the 'off' position.
2
Insert the key fob into the ignition or press the START button without pressing the brake pedal (to enter the 'ACC' mode).
3
Locate the 'OK' button on the right side of the steering wheel.
4
Navigate using the left scroll wheel or buttons on the steering wheel to access the 'Settings' or 'My Car' menu on the dashboard display.
5
Select 'Service' or 'Maintenance,' then look for the option to reset the maintenance light.

Solution

1. Prepare Vehicle

Ensure the vehicle is parked safely and is in "ACC" mode.
Have the key fob ready for ignition.

Press the "OK" button on the steering wheel to access the main menu.
Use the left scroll wheel to navigate to "Settings" or "My Car."
Select "Service" from the options presented on the dashboard display.

3. Reset Maintenance Light

Once in the "Service" menu, locate the option for "Reset Maintenance Light" or "Reset Service Interval."
Confirm the selection by pressing "OK" or "Yes" when prompted to reset the maintenance light.

4. Verify Reset

After confirmation, the maintenance light should disappear from the dashboard.
Turn off the vehicle and restart to ensure the maintenance light remains off.