how to reset the maintenance light on my Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

378 words

Problem Statement

Learn how to reset the maintenance light on your 2017-Present Volvo XC60. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' before attempting to reset the maintenance light.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service displayed
•No other warning lights present
•Engine performance is normal (if no other issues exist)

Diagnostic Steps

1
Verify that the vehicle is in the 'Run' position without starting the engine.
2
Ensure all doors are closed to avoid any interruptions during the reset process.
3
Access the instrument cluster and check if any additional service reminders are present.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or remote

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Gather necessary tools: a key fob or remote.

2. Access the Instrument Cluster

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal (to enter the "Run" position).
Wait for the dashboard lights to illuminate.

3. Reset the Maintenance Light

Locate the "Trip" button on the instrument cluster.
Press and hold the "Trip" button until the odometer display shows the maintenance reminder.
Release the "Trip" button, then press it again quickly.
The display will show "Reset?"—press and hold the "Trip" button again until the display changes to "Reset Complete" or similar confirmation.

4. Verify the Reset

Turn off the ignition and remove the key fob or turn off the start button.
Restart the vehicle to confirm that the maintenance light is no longer illuminated.