FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the traction control light on my Volvo XC60 536 (2017-Present) - Volvo XC60
Home/Cars/Volvo/XC60/536 (2017-Present)/how to fix the traction control light on my Volvo XC60 536 (2017-Present)

how to fix the traction control light on my Volvo XC60 536 (2017-Present)

Volvo XC60 536 (2017-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
575 words

Problem Statement

Learn how to diagnose and fix the traction control light issue on your 2017-present Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Brakes
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the vehicle to cool down before inspecting the brake components.

Symptoms

  • •Traction control warning light illuminated on the dashboard
  • •Reduced traction or slipping during acceleration
  • •Unusual noise from the wheels during traction control activation
  • •Engine power reduction during slippery conditions
  • •Possible check engine light alongside traction control light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Brake cleaner
  • •Wire brush

Parts Required

  • •Wheel speed sensors (if damaged)
  • •Traction control switch (if faulty)
  • •Brake fluid (DOT 4)

Additional Information

Affected Component
Brakes
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts required for the repair.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Inspect and Clean Wheel Speed Sensors
  • Tools Required: Socket set, brake cleaner, wire brush
  • Locate each wheel speed sensor at the brake assembly.
  • Remove the sensor mounting bolts using a socket set.
  • Clean the sensor and the mounting area with brake cleaner and a wire brush to remove dirt and debris.
  • Reinstall the sensor and torque the bolts to manufacturer specifications (refer to service manual for specific torque values).
3. Check ABS Module and Wiring
  • Inspect the ABS module for any visible signs of damage or corrosion.
  • Use a multimeter to check the wiring harness for continuity and any shorts.
  • Repair or replace the damaged wiring or module as necessary.
4. Check Brake Fluid Level
  • Locate the brake fluid reservoir and check the fluid level.
  • If low, top off with the recommended brake fluid type (usually DOT 4) as specified in the owner’s manual.
  • Inspect for any leaks in the brake lines or at the master cylinder.
5. Test Traction Control Switch
  • Reconnect the battery terminal and turn on the ignition.
  • Press the traction control switch to ensure it engages and disengages properly.
  • If the switch is faulty, replace it with a new one.