how to fix the remote start on my Volvo XC60 536 (2017-Present)?

Volvo XC60 536 (2017-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

516 words

Problem Statement

Learn how to diagnose and fix the remote start issue on your 2017-present Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on any electrical systems to prevent shorts or shocks.

Symptoms

•Remote start button does not respond when pressed
•Engine does not crank or start remotely
•"Remote Start Disabled" warning appears on the dashboard
•Key fob battery is low or dead
•Check engine light may be illuminated

Diagnostic Steps

1
Check the key fob battery and replace if necessary.
2
Verify that the vehicle is in a suitable environment for remote start (e.g., not in a garage, hood closed).
3
Scan the vehicle’s onboard diagnostics (OBD-II) for any error codes related to the remote start system.
4
Inspect the remote start relay for proper operation and connection.
5
Ensure that all doors, hood, and trunk are closed properly, as the remote start system may disable if any are ajar.
6
Confirm that the vehicle’s security system is not preventing remote start activation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Small flathead screwdriver

Parts Required

•CR2032 battery
•Remote start relay

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the key fob battery and replace if necessary.
2
Verify that the vehicle is in a suitable environment for remote start (e.g., not in a garage, hood closed).
3
Scan the vehicle’s onboard diagnostics (OBD-II) for any error codes related to the remote start system.
4
Inspect the remote start relay for proper operation and connection.
5
Ensure that all doors, hood, and trunk are closed properly, as the remote start system may disable if any are ajar.
6
Confirm that the vehicle’s security system is not preventing remote start activation.

Solution

1. Preparation

Gather all necessary tools and parts.
Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Replace Key Fob Battery

Tools Required: Small flathead screwdriver, new CR2032 battery.
Instructions:
1. Use the flathead screwdriver to carefully pry open the key fob casing.
2. Remove the old battery and insert the new CR2032 battery, ensuring the positive side is facing up.
3. Snap the key fob casing back together securely.

3. Inspect and Replace Remote Start Relay

Tools Required: Multimeter, socket set.
Instructions:
1. Locate the remote start relay in the fuse box (consult the vehicle’s manual for exact location).
2. Use a multimeter to test the relay for continuity.
3. If the relay is faulty, remove it from the fuse box.
4. Install a new relay by pushing it firmly into place.

4. Reconnect Battery

Reconnect the vehicle battery and ensure all connections are secure.

5. Check for Error Codes

Tools Required: OBD-II scanner.
Instructions:
1. Connect the OBD-II scanner to the vehicle.
2. Scan for any error codes related to the remote start system.
3. Clear the error codes and perform a test of the remote start feature.