why does my Volvo XC60 Second Generation (2018-2024) shake when braking

Volvo XC60 Second Generation (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking when braking in Volvo XC60 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely raised on jack stands before working on the brakes.
•Allow the brake components to cool before handling to prevent burns.

Symptoms

•Vibration felt through the steering wheel when braking
•Pulsation in the brake pedal
•Increased stopping distance
•Noise such as grinding or squeaking during braking
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake rotors for warping or uneven thickness using a micrometer or dial indicator.
2
Check brake pad condition for wear and proper installation.
3
Examine suspension components (control arms, bushings, and tie rods) for wear or damage.
4
Perform a visual inspection of the brake calipers for proper operation and alignment.
5
Scan for any relevant error codes with an OBD-II scanner to identify potential electronic issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Dial indicator
•Torque wrench
•Brake cleaner

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven thickness using a micrometer or dial indicator.
2
Check brake pad condition for wear and proper installation.
3
Examine suspension components (control arms, bushings, and tie rods) for wear or damage.
4
Perform a visual inspection of the brake calipers for proper operation and alignment.
5
Scan for any relevant error codes with an OBD-II scanner to identify potential electronic issues.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery to prevent any electrical issues if necessary.

2. Remove Wheel Assembly

Tools Required: Jack, jack stands, lug wrench.
Loosen the lug nuts slightly before lifting the vehicle.
Use the jack to lift the vehicle and secure it on jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Rotors

Tools Required: Torque wrench, brake cleaner.
Inspect the rotors for warping using a dial indicator. If warped beyond specifications, remove the caliper bolts and detach the caliper.
Remove the rotor by unscrewing the retaining screws (if applicable) and sliding it off the wheel hub.
Clean the hub surface with brake cleaner to ensure proper contact with the new rotor.
Install the new rotor and torque the retaining screws to manufacturer specifications.

4. Inspect and Replace Brake Pads

Remove the caliper completely if not already done.
Inspect the brake pads for wear. If they are below the minimum thickness, replace them.
Slide the new brake pads into the caliper bracket.
Reattach the caliper over the new pads and torque the caliper bolts to specifications.

5. Reassemble and Test

Reinstall the wheel and torque the lug nuts in a criss-cross pattern to the specified torque.
Lower the vehicle and reconnect the battery.
Conduct a test drive to ensure the shaking is resolved and the brakes function correctly.