how to reset the oil light on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

383 words

Problem Statement

Learn how to reset the oil light on your 2018-2024 Volvo XC60. Step-by-step guide to ensure your oil change indicator is cleared.

Affected Component

Engine

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Oil change indicator light illuminated on the dashboard
•Reminder message displayed on the driver information system
•Potential engine oil level warning (if applicable)

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Locate the 'OK' button on the right side of the steering wheel.
3
Navigate to the 'Car' menu using the steering wheel buttons.
4
Select 'Status' and then choose 'Oil' from the menu options.
5
Look for the option to reset the oil light and follow the prompts.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically needed for resetting the oil light.

Parts Required

•None specifically needed for resetting the oil light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Locate the 'OK' button on the right side of the steering wheel.
3
Navigate to the 'Car' menu using the steering wheel buttons.
4
Select 'Status' and then choose 'Oil' from the menu options.
5
Look for the option to reset the oil light and follow the prompts.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface.
Ensure the ignition is turned off before starting.

Turn the ignition key to the "Run" position (do not start the engine).
Use the "OK" button on the steering wheel to access the main menu on the driver display.
Scroll to the "Car" menu using the right scroll button.

3. Reset the Oil Light

From the "Car" menu, select "Status."
Choose the "Oil" option.
Follow the on-screen instructions to reset the oil service light.
Confirm the reset when prompted.

4. Verify the Reset

Turn off the ignition and then restart the vehicle.
Check that the oil light is no longer illuminated.