how to reset the oil change light on Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

371 words

Problem Statement

Learn how to reset the oil change light on your 2018-2024 Volvo XC60. Step-by-step guide with diagnostic steps and safety tips for a successful reset.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and on a level surface before starting the reset procedure.

Symptoms

•Oil change warning light illuminated on the dashboard
•Message displayed indicating oil change required
•No engine performance issues related to oil level

Diagnostic Steps

1
Ensure that the vehicle is in the 'Run' or 'On' position without starting the engine.
2
Confirm that the oil change has been performed and the new oil and filter are installed.
3
Check the vehicle's owner manual for specific reset instructions if necessary.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key

Parts Required

•No parts required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools such as the vehicle key and ensure the vehicle is parked on a level surface.

2. Access the Instrument Cluster

Insert the key into the ignition or press the start button to turn the vehicle to the "Run" position (do not start the engine).
Wait for all the warning lights to illuminate on the dashboard.

3. Reset the Oil Change Light

Using the left steering wheel controls, navigate to the "Settings" menu on the instrument cluster display.
Select "My Car" or "Vehicle Settings" depending on the exact model variant.
Scroll to "Oil Change" or "Oil Service" option.
Select "Reset" or "Reset Service Light".
Confirm the reset when prompted by selecting "Yes".

4. Verify the Reset

Turn off the ignition and remove the key.
Restart the vehicle to ensure the oil change light is no longer illuminated.