how to reset the maintenance light on my Volvo XC60

Volvo XC60 Second Generation (2018-2024)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 with this step-by-step guide. Ensure your vehicle's maintenance is accurately tracked.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged while performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle running normally without performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without starting the engine) and turn it to the 'RUN' position.
3
Locate the odometer display on the dashboard.
4
Press and hold the trip reset button until the display shows 'Resetting' or a similar message.
5
Release the trip reset button once the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this process

Parts Required

•None required for this process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without starting the engine) and turn it to the 'RUN' position.
3
Locate the odometer display on the dashboard.
4
Press and hold the trip reset button until the display shows 'Resetting' or a similar message.
5
Release the trip reset button once the maintenance light turns off.

Solution

1. Preparation

Gather the vehicle keys and ensure the vehicle is parked in a safe, flat area.
Ensure that the vehicle is turned off before beginning the reset process.

2. Ignition Position

Insert the key into the ignition or press the start button once without starting the engine.
Turn the key to the "RUN" position, ensuring all dashboard lights activate.

3. Resetting the Maintenance Light

Locate the trip reset button on the instrument cluster.
Press and hold the trip reset button while watching the odometer display.
Continue holding the button until the display indicates "Resetting" or the maintenance light turns off (this usually takes about 10 seconds).
Release the trip reset button.

4. Final Check

Turn off the ignition and then restart the vehicle.
Confirm that the maintenance light is no longer illuminated on the dashboard.