how to reset the maintenance light in my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

370 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 (2018-2024) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before attempting the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for service displayed on the instrument cluster
•No engine performance issues related to the maintenance light

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the trip odometer reset button on the dashboard.
3
Turn off the ignition completely.
4
Press and hold the trip odometer reset button.
5
While holding the button, turn the ignition back to the 'On' position.
6
Release the trip odometer reset button when the maintenance light flashes and turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine.
2
Locate the trip odometer reset button on the dashboard.
3
Turn off the ignition completely.
4
Press and hold the trip odometer reset button.
5
While holding the button, turn the ignition back to the 'On' position.
6
Release the trip odometer reset button when the maintenance light flashes and turns off.

Solution

1. Preparation

Gather necessary items: vehicle key fob.
Ensure the vehicle is parked safely with the ignition off.

2. Resetting the Maintenance Light

Turn On Ignition
- Without starting the engine, turn the ignition to the "On" position (the position just before starting).
Press and Hold the Trip Odometer Reset Button
- Locate the trip odometer reset button on the instrument cluster.
- Press and hold this button down continuously.
Turn Off the Ignition
- While still holding the trip odometer reset button, turn the ignition off completely.
Turn On Ignition Again
- With the trip odometer reset button still held down, turn the ignition back to the "On" position.
Release the Button
- Once the maintenance light flashes and then turns off, release the trip odometer reset button.
Verify Reset
- Check the dashboard to ensure that the maintenance light is no longer illuminated.