how to reset the engine light on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

420 words

Problem Statement

Learn how to reset the engine light on your 2018-2024 Volvo XC60. Step-by-step instructions for diagnosing and clearing the check engine light.

Affected Component

Engine

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing any diagnostics

Symptoms

•Check engine light illuminated
•Possible temporary loss of power
•Engine running smoothly after minor issues
•No abnormal sounds from the engine
•Vehicle may exhibit no performance issues

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner
2
Address underlying issues if necessary
3
Verify the vehicle’s readiness status

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Vehicle owner's manual

Parts Required

•None for the reset process, unless any underlying issues need addressing.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, vehicle owner's manual.
Ensure the vehicle is parked on a level surface and the ignition is turned off.

2. Connect OBD-II Scanner

Plug the OBD-II scanner into the vehicle's OBD-II port, typically located under the dashboard near the steering column.
Turn on the ignition without starting the engine.

3. Access Engine Codes

Follow the instructions on the OBD-II scanner to navigate to the engine codes section.
Record any trouble codes if present for future reference.

4. Clear Codes

Select the option to clear or erase the trouble codes from the scanner menu.
Confirm the action when prompted by the scanner.
Wait for the scanner to indicate that the codes have been successfully cleared.

5. Disconnect the Scanner

Remove the OBD-II scanner from the port.
Turn off the ignition.

6. Test Drive the Vehicle

Start the engine and observe if the check engine light remains off.
Drive the vehicle for at least 10-15 minutes to allow the onboard diagnostics to run checks.