how to reset maintenance light on Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

388 words

Problem Statement

Learn how to reset the maintenance light on your 2018-2024 Volvo XC60. Step-by-step instructions to ensure your vehicle's maintenance reminders are accurate.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard
•Possible service reminder notifications in the vehicle's display
•No other performance issues present

Diagnostic Steps

1
Turn the vehicle's ignition to the 'ON' position without starting the engine.
2
Use the buttons on the steering wheel to navigate through the instrument cluster menu.
3
Locate the 'Settings' or 'Car Status' option in the menu.
4
Find the 'Service' or 'Maintenance' section in the settings.
5
Select the option to reset the maintenance light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the vehicle's ignition to the 'ON' position without starting the engine.
2
Use the buttons on the steering wheel to navigate through the instrument cluster menu.
3
Locate the 'Settings' or 'Car Status' option in the menu.
4
Find the 'Service' or 'Maintenance' section in the settings.
5
Select the option to reset the maintenance light.

Solution

1. Preparation

Ensure the vehicle is parked safely and the ignition is off.
Gather the vehicle key fob.

2. Ignition Position

Insert the key fob into the ignition slot or have it ready if keyless.
Turn the ignition to the "ON" position without starting the engine (the dashboard lights should illuminate).

Use the right-side steering wheel controls to navigate through the menu.
Press the “Home” button to access the main menu if necessary.

Scroll down to find “Settings” or “Car Status.”
Select this option and then navigate to “Service” or “Maintenance.”

5. Reset Maintenance Light

Within the service menu, look for “Reset Service Light” or “Reset Maintenance.”
Confirm the reset when prompted. The maintenance light should turn off.

6. Turn Off Ignition

Turn the ignition off completely and then start the engine to ensure the maintenance light is no longer illuminated.