FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the traction control light on my Volvo XC60 that won’t turn off - Volvo XC60
Home/Cars/Volvo/XC60/Second Generation (2018-2024)/how to fix the traction control light on my Volvo XC60 that won’t turn off

how to fix the traction control light on my Volvo XC60 that won’t turn off

Volvo XC60 Second Generation (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
529 words

Problem Statement

Learn how to diagnose and fix the traction control light issue on your Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow vehicle to cool down before inspecting any components near the engine.

Symptoms

  • •Traction control warning light illuminated on the dashboard
  • •Reduced traction in slippery conditions
  • •Potential loss of power to the wheels during acceleration
  • •Unresponsive traction control system
  • •Possible check engine light may also be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Electrical contact cleaner
  • •Soft cloth

Parts Required

  • •Brake fluid (if needed)
  • •Traction control switch (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to ensure safety.
  • Allow the vehicle to sit for at least 10 minutes before starting work.
2. Inspect and Clean Wheel Speed Sensors
  • Locate the wheel speed sensors at each wheel hub.
  • Remove any debris or dirt around the sensors using a soft cloth.
  • Check the wiring harness for damage or corrosion.
  • Reconnect any loose connections.
3. Check ABS Module and Wiring
  • Inspect the ABS module located near the brake master cylinder.
  • Look for any frayed wires or corrosion on connectors.
  • Clean any corrosion with electrical contact cleaner.
  • Ensure that all connections are secure.
4. Verify Brake Fluid Level
  • Locate the brake fluid reservoir under the hood.
  • Check the fluid level; if low, add the manufacturer-recommended brake fluid.
  • Inspect for any visible leaks in the brake lines or around the ABS module.
5. Test Traction Control Switch
  • Locate the traction control switch on the dashboard.
  • Remove the switch panel if necessary to access the switch.
  • Use a multimeter to test the switch for continuity.
  • Replace the switch if it is faulty.
6. Reconnect Battery and Reset System
  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear any stored error codes.
  • Start the vehicle and check if the traction control light is off.