how to fix the remote start not working on my Volvo XC60 Second Generation (2018-2024)

Volvo XC60 Second Generation (2018-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

500 words

Problem Statement

Learn how to diagnose and fix remote start issues in your 2018-2024 Volvo XC60. Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a secure area to avoid accidental starts.

Symptoms

•Remote start button is unresponsive
•Vehicle does not start when remote start is attempted
•Check engine light illuminated or warning messages displayed
•Key fob battery may be low or dead
•Remote start indicator on dashboard does not light up

Diagnostic Steps

1
Check the battery level of the key fob using a multimeter or replace the battery to ensure it’s not a power issue.
2
Scan the vehicle’s onboard diagnostic system with an OBD-II scanner to retrieve any error codes related to the remote start function.
3
Verify if the vehicle is in a suitable condition for remote start (e.g., doors closed, hood closed, transmission in park).
4
Inspect the remote start settings in the vehicle’s infotainment system to ensure it is enabled.
5
Check for any blown fuses related to the remote start system in the fuse box.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set

Parts Required

•Key fob battery (CR2032)
•Fuse (if applicable based on inspection)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery level of the key fob using a multimeter or replace the battery to ensure it’s not a power issue.
2
Scan the vehicle’s onboard diagnostic system with an OBD-II scanner to retrieve any error codes related to the remote start function.
3
Verify if the vehicle is in a suitable condition for remote start (e.g., doors closed, hood closed, transmission in park).
4
Inspect the remote start settings in the vehicle’s infotainment system to ensure it is enabled.
5
Check for any blown fuses related to the remote start system in the fuse box.

Solution

1. Preparation

Tools Required:
- OBD-II scanner
- Multimeter
- Screwdriver set
Safety Warnings:
- Ensure the vehicle is in a secure area to avoid accidental starts.

2. Replace Key Fob Battery

Open the key fob using a small screwdriver.
Remove the old battery and replace it with a new battery (typically CR2032).
Reassemble the key fob and test the remote start function.

3. Clear Diagnostic Codes

Connect the OBD-II scanner to the vehicle’s diagnostic port.
Turn on the ignition without starting the engine.
Follow the scanner instructions to read and clear any diagnostic trouble codes (DTCs).
Turn off the ignition and disconnect the scanner.

4. Check Remote Start Settings

Access the vehicle’s infotainment system.
Navigate to the settings menu and locate the remote start option.
Ensure that the remote start feature is activated.

5. Inspect Fuses

Locate the fuse box (usually found under the dashboard or in the engine compartment).
Identify the fuse related to the remote start system using the diagram on the fuse box cover.
Remove the fuse and inspect it for damage; replace if blown.