FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Volvo XC60 First Generation (2008-2017) windscreen wiper stop working? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/why does my Volvo XC60 First Generation (2008-2017) windscreen wiper stop working?

why does my Volvo XC60 First Generation (2008-2017) windscreen wiper stop working?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
534 words

Problem Statement

Learn how to diagnose and fix windscreen wiper issues on a Volvo XC60 (2008-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems to prevent shock or short circuits.
  • •Allow the engine to cool before working on components near the engine.

Symptoms

  • •Windscreen wipers do not operate at all
  • •Wipers may operate intermittently
  • •Wipers work only on certain speed settings
  • •No noise from wiper motor
  • •Washer fluid does not spray
  • •Wiper blades are not moving smoothly

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Multimeter
  • •Wrench set
  • •Fuse puller
  • •Screwdriver set

Parts Required

  • •Wiper motor (if faulty)
  • •Wiper fuse (if blown)
  • •Wiper blades (if worn)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the ignition is off.
  • Disconnect the vehicle battery to prevent electrical shock.
2. Inspect and Replace Wiper Fuse
  • Locate the fuse box (usually under the dashboard or in the engine compartment).
  • Remove the cover and locate the wiper fuse using the diagram.
  • Pull the fuse using a fuse puller or pliers.
  • Inspect the fuse; if blown, replace it with a fuse of the same amperage.
3. Test and Replace Wiper Motor
  • Reconnect the battery and activate the wiper switch.
  • If the motor does not operate, disconnect the battery again.
  • Remove the wiper arms using a socket set and a puller if necessary.
  • Unbolt the wiper motor from its mount.
  • Disconnect the electrical connector from the motor.
  • Install the new wiper motor by reversing the steps, ensuring it’s securely fastened and connected.
4. Inspect and Repair Linkage
  • While the wiper motor is out, inspect the linkage mechanism for wear or binding.
  • Lubricate the linkage with a suitable grease if necessary.
  • Replace any damaged components in the linkage.
5. Reassemble and Test
  • Reconnect the battery and reinstall the wiper arms.
  • Test the wipers in all modes to ensure proper operation.
  • Check the washer fluid function to ensure it operates correctly.