why does my Volvo XC60 First Generation (2008-2017) shake when I brake

Volvo XC60 First Generation (2008-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

475 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Volvo XC60 First Generation (2008-2017). Step-by-step guide with symptoms and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always wear safety glasses and gloves.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Steering wheel shakes during braking
•Pulsation felt through brake pedal
•Uneven wear on brake pads
•Squeaking or grinding noises when braking
•Vehicle pulls to one side while braking

Diagnostic Steps

1
Inspect brake pads for uneven wear or damage.
2
Check brake rotors for warping or scoring.
3
Examine wheel bearings for play or wear.
4
Verify proper tire inflation and condition.
5
Inspect suspension components for damage or wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Caliper tool
•Torque wrench
•Dial indicator

Parts Required

•Brake pads
•Brake rotors
•Brake caliper grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts required.
Park the vehicle on a level surface and engage the parking brake.

2. Raise the Vehicle

Use a jack to lift the front or rear of the vehicle (depending on where the issue is felt).
Secure with jack stands for safety.

3. Remove Wheel

Use a lug wrench to loosen and remove the lug nuts.
Take off the wheel to access the braking components.

4. Inspect and Replace Brake Pads

Inspection:
- Check brake pads for uneven wear; replace if worn down.
Replacement:
- Remove the caliper bolts using a socket set.
- Slide the caliper off the rotor and secure it with a bungee cord (do not let it dangle).
- Remove old brake pads and install new ones, ensuring proper orientation.
- Compress the caliper piston using a caliper tool to fit over the new pads.

5. Inspect and Replace Brake Rotors (if necessary)

Inspection:
- Check rotors for warping (use a dial indicator) or scoring.
Replacement:
- Remove the rotor by unscrewing the retaining screws (if applicable).
- Clean hub surface before installing new rotors.
- Install new rotors and secure them with screws.

6. Reassemble Components

Reattach the caliper over the new pads and torque caliper bolts to manufacturer specifications.
Reinstall the wheel and hand-tighten lug nuts.
Lower the vehicle and torque lug nuts to manufacturer specifications.