FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I do if my XC60's windshield wipers are not working properly? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What should I do if my XC60's windshield wipers are not working properly?

What should I do if my XC60's windshield wipers are not working properly?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
602 words

Problem Statement

Learn how to diagnose and repair windshield wiper issues on Volvo XC60 (2008-2017) with step-by-step instructions and required tools.

Affected Component
windshield wipers
Estimated Time
2-3 hours

Symptoms

  • •Wipers do not move at all.
  • •Wipers move erratically or intermittently.
  • •Wipers operate on one speed only.
  • •Wipers do not return to the resting position.
  • •No sound from the wiper motor when activated.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flat and Phillips screwdriver
  • •Multimeter
  • •Torque wrench (if needed for reassembly)
  • •Wrench or socket set (for motor removal if necessary)
  • •Replacement fuse (if blown)

Additional Information

Affected Component
windshield wipers
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: Windshield Wipers Not Working Properly on Volvo XC60 (2008-2017)

Step 1: Visual Inspection

  • Check Wiper Blades: Inspect the wiper blades for wear, damage, or debris. Ensure they are properly attached to the wiper arms.
  • Check for Obstructions: Ensure there are no obstructions on the windshield or in the wiper mechanism area.

Step 2: Check the Wiper Switch

  • Function Test: Turn on the ignition and operate the wiper switch. Listen for the sound of the wiper motor.
  • Multimeter Test: Using a multimeter, check for voltage at the wiper switch. If there's no voltage, the switch may be faulty.

Step 3: Inspect Fuses

  • Locate Fuse Box: Open the driver's side door and locate the fuse box (usually found near the dashboard).
  • Check Wiper Fuse: Use the fuse diagram to identify the wiper fuse. Remove it and check if it is blown. Replace if necessary.

Step 4: Test the Wiper Motor

  • Access the Wiper Motor: Remove the plastic cover at the base of the windshield to access the wiper motor.
  • Power Test: Disconnect the wiper motor connector and use a multimeter to check for voltage when the wiper switch is activated.
    • Expected Voltage: You should see battery voltage (approximately 12V).
    • If no voltage is present, the issue may be with the wiring or the wiper switch.

Step 5: Check the Wiper Linkage

  • Manual Inspection: With the wiper motor disconnected, manually move the wiper arms to check for any resistance or binding in the linkage.
  • Reattach and Test: If the linkage appears intact, reconnect the wiper motor and test the operation again.
Tools Required
  • Flat and Phillips screwdriver
  • Multimeter
  • Torque wrench (if needed for reassembly)
  • Wrench or socket set (for motor removal if necessary)
  • Replacement fuse (if blown)
Repair Instructions

Repairing/Replacing Wiper Blades

  1. Lift the wiper arms away from the windshield.
  2. Press the tab on the wiper blade connector and slide the blade off the arm.
  3. Align the new blade with the arm and slide it in until it clicks.
  4. Lower the wiper arms back onto the windshield.

Replacing the Wiper Motor

  1. Disconnect the Battery: Disconnect the negative terminal of the battery to prevent electrical shorts.
  2. Remove the Wiper Arms: Use a flat screwdriver to carefully pry off the caps on the wiper arms, then remove the nuts holding the arms in place.
  3. Remove the Wiper Motor:
    • Disconnect the motor’s electrical connector.
    • Remove bolts securing the motor to the vehicle.
    • Carefully detach the motor from the linkage.
  4. Install New Wiper Motor:
    • Position the new motor and secure it with bolts.
    • Reconnect the electrical connector.
    • Reinstall the wiper arms and secure them with nuts.
  5. Reconnect the Battery: Reconnect the negative terminal of the battery.

Testing After Repair

  1. Turn on the ignition and test the wiper operation.
  2. Verify that all speeds work correctly and that the wipers return to the resting position when turned off.
Conclusion

If after these steps the wipers still do not function correctly, further diagnosis may be necessary, possibly involving checking wiring harnesses or the body control module. If you are not comfortable performing these diagnostics or repairs, consider consulting a professional automotive technician.