FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I do if my 2010 Volvo XC60 is making a loud knocking noise? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What should I do if my 2010 Volvo XC60 is making a loud knocking noise?

What should I do if my 2010 Volvo XC60 is making a loud knocking noise?

Volvo XC60 First Generation (2008-2017)

Error Codes
4-6 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
603 words

Problem Statement

Learn how to diagnose and repair a loud knocking noise in your 2010 Volvo XC60 with step-by-step instructions and required tools.

Affected Component
engine and suspension
Estimated Time
4-6 hours

Symptoms

  • •A loud knocking noise, particularly when accelerating, decelerating, or going over bumps.
  • •Possible vibrations felt through the steering wheel or floorboard.
  • •Noise may vary with engine speed or load.
  • •Check engine light may or may not be illuminated.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Tire iron or lug wrench
  • •Jack and jack stands
  • •Torque wrench
  • •Socket set (metric)
  • •Screwdrivers (flat and Phillips)
  • •Stethoscope or long screwdriver
  • •Flashlight
  • •Safety glasses

Additional Information

Affected Component
engine and suspension
Estimated Time
4-6 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing and Repairing Loud Knocking Noise in a 2010 Volvo XC60

Tools Required
  • OBD-II scanner
  • Tire iron or lug wrench
  • Jack and jack stands
  • Torque wrench
  • Socket set (metric)
  • Screwdrivers (flat and Phillips)
  • Stethoscope or long screwdriver
  • Flashlight
  • Safety glasses
Repair Instructions
Step 1: Identifying the Source

  • Engine Components: If the noise is coming from the engine, check the following:

    • Oil Level: Ensure oil is at the correct level. If low, top it up and recheck for noise.
    • Timing Belt: Inspect for wear or misalignment, which could cause knocking.
    • Piston Slap: If the noise is internal, a compression test may be necessary to check for worn piston rings.

  • Suspension Components: If the noise is from the suspension:

    • Control Arm Bushings: Inspect for cracks or wear. Replace if necessary.
    • Strut Mounts: Check for damage or looseness, and replace if needed.
Step 2: Repairing Engine-Related Issues
  1. Oil Change: If oil is dirty or low, change the oil and filter.
  2. Replace Timing Belt: Follow manufacturer specifications for timing belt replacement.
  3. Replace Engine Mounts:
    • Loosen the bolts on the engine mount using a socket set.
    • Raise the engine slightly with a jack to relieve tension on the mount.
    • Remove the old mount and replace with a new one, tightening bolts to specified torque.
Step 3: Repairing Suspension Issues

  1. Replacing Control Arm Bushings:

    • Lift the vehicle and secure on jack stands.
    • Remove the wheel using a lug wrench.
    • Unbolt the control arm from the chassis and remove the old bushings.
    • Install new bushings and reattach the control arm, ensuring all bolts are torqued to specification.

  2. Replacing Strut Mounts:

    • Remove the strut assembly from the vehicle.
    • Use a spring compressor to safely remove the spring from the strut if necessary.
    • Replace the strut mount and reassemble, ensuring all components are in good condition.
Step 4: Final Checks
  • Road Test: After repairs, take the vehicle for a test drive to ensure the knocking noise has been resolved.
  • Re-scan for Codes: Use the OBD-II scanner to check for any remaining trouble codes.
Conclusion

If the knocking noise persists after these repairs, or if you are uncertain during any step, it is advisable to consult a professional mechanic for a thorough diagnosis and repair.