FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if my 2010 Volvo XC60 won't start? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/What should I check if my 2010 Volvo XC60 won't start?

What should I check if my 2010 Volvo XC60 won't start?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
668 words

Problem Statement

Learn how to diagnose and repair starting issues in your 2010 Volvo XC60 with our step-by-step guide.

Affected Component
Battery, Starter Motor, Ignition System, Fuel System
Estimated Time
2-4 hours

Symptoms

  • •Engine does not crank when the key is turned to the start position.
  • •Engine cranks but does not start (no ignition).
  • •Clicking sound when the key is turned.
  • •Dashboard lights dim or flicker when the key is turned to the start position.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Battery tester
  • •Wrench set
  • •Wire brush
  • •Fuse puller or needle-nose pliers
  • •Jumper wires
  • •Spark tester
  • •Fuel pressure gauge

Additional Information

Affected Component
Battery, Starter Motor, Ignition System, Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

When a 2010 Volvo XC60 won't start, there could be various reasons behind the issue. Below are the symptoms, diagnostic steps, tools required, and repair instructions to help you troubleshoot the problem effectively.

Step 1: Check Battery Condition

  • Symptoms: If the dashboard lights dim or flicker, this may indicate a weak battery.
  • Tools Required: Multimeter, battery tester.
  • Action:
    1. Use a multimeter to check the battery voltage. A healthy battery should read around 12.6 volts.
    2. If the voltage is below 12.4 volts, consider charging the battery or jump-starting the vehicle.

Step 2: Inspect Battery Connections

  • Tools Required: Wrench set, wire brush.
  • Action:
    1. Visual inspection of battery terminals for corrosion or loose connections.
    2. Tighten any loose connections and clean terminals with a wire brush to remove corrosion.

Step 3: Check Fuses

  • Symptoms: No electrical power to the starter or ignition system.
  • Tools Required: Fuse puller or needle-nose pliers.
  • Action:
    1. Locate the fuse box (typically under the dashboard or engine compartment).
    2. Check for blown fuses related to the ignition and starter system (refer to the owner's manual for fuse locations).
    3. Replace any blown fuses and retest.

Step 4: Test the Starter Motor

  • Symptoms: Engine does not crank but clicks.
  • Tools Required: Multimeter, jumper wires.
  • Action:
    1. Locate the starter motor (usually near the transmission).
    2. With a multimeter, check for voltage at the starter terminal when the key is turned to the start position.
    3. If there is voltage but the starter does not engage, the starter may be faulty.
    4. If no voltage is present, check the ignition switch and starter relay.

Step 5: Check the Ignition System

  • Symptoms: Cranks but does not start.
  • Tools Required: Spark tester.
  • Action:
    1. Remove one spark plug wire and connect a spark tester to it.
    2. Crank the engine while observing the spark tester.
    3. If there is no spark, check the ignition coil and related wiring.

Step 6: Fuel System Check

  • Symptoms: Cranks but does not start.
  • Tools Required: Fuel pressure gauge.
  • Action:
    1. Locate the fuel rail and attach a fuel pressure gauge.
    2. Turn the ignition to the ON position (without cranking) and check the pressure.
    3. Compare the readings to the specifications in the service manual (should be between 3.5 to 4.5 bar).
    4. If fuel pressure is low, inspect the fuel pump, fuel filter, and fuel lines.
Repair Instructions

Battery Replacement

  1. Disconnect the negative (-) terminal first, followed by the positive (+) terminal.
  2. Remove the battery hold-down bracket and lift the battery out.
  3. Place the new battery in the tray, securing it with the hold-down bracket.
  4. Reconnect the positive (+) terminal first, followed by the negative (-) terminal.

Starter Motor Replacement

  1. Disconnect the battery.
  2. Remove any components obstructing access to the starter (e.g., air intake).
  3. Unbolt the starter from the engine (usually held by 2-3 bolts).
  4. Disconnect the wiring harness from the starter.
  5. Install the new starter by reversing the steps.

Ignition Coil Replacement

  1. Disconnect the battery.
  2. Remove the ignition coil connector and the mounting bolts.
  3. Replace the coil with a new unit, ensuring proper connection.
  4. Reconnect the battery and test.
Final Checks
  • After performing repairs, ensure all connections are secure.
  • Start the vehicle and monitor for any abnormal sounds or warning lights.
  • If the problem persists, further diagnostics may be required, possibly involving a professional technician.

By following these structured steps, you can effectively diagnose and repair the starting issue on your 2010 Volvo XC60.