What common transmission error codes do Volvo XC60 owners encounter?

Volvo XC60 First Generation (2008-2017)

Error Codes

medium

Difficulty

medium

Severity

4 min read

652 words

Problem Statement

Discover common transmission error codes for the Volvo XC60 (2008-2017), their symptoms, diagnostic steps, and repair instructions.

Affected Component

Transmission

Symptoms

•Erratic shifting or harsh shifting
•Speedometer may function intermittently
•Engine RPM may increase without a corresponding increase in vehicle speed
•Shuddering during acceleration
•Warning lights on the dashboard
•Slipping or harsh shifts
•Poor or no engagement of gears
•Overheating of transmission
•General transmission issues

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port and retrieve error codes
2
Check the transmission fluid level and condition
3
Inspect wiring and connectors related to the transmission control module and sensors
4
Test the output speed sensor using a multimeter
5
Check the torque converter clutch solenoid operation
6
Use a pressure gauge to test the transmission fluid pressure
7
Conduct a test drive to monitor vehicle performance

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II Scanner
•Multimeter
•Transmission fluid pressure gauge
•Basic hand tools (screwdrivers, wrenches)
•Torque wrench
•Vehicle service manual

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Erratic shifting or harsh shifting

•Speedometer may function intermittently

•Engine RPM may increase without a corresponding increase in vehicle speed

•Shuddering during acceleration

•Warning lights on the dashboard

•Slipping or harsh shifts

•Poor or no engagement of gears

•Overheating of transmission

•General transmission issues

Diagnostic Steps

1
Connect an OBD-II scanner to the vehicle's diagnostic port and retrieve error codes
2
Check the transmission fluid level and condition
3
Inspect wiring and connectors related to the transmission control module and sensors
4
Test the output speed sensor using a multimeter
5
Check the torque converter clutch solenoid operation
6
Use a pressure gauge to test the transmission fluid pressure
7
Conduct a test drive to monitor vehicle performance

Solution

Common Transmission Error Codes for Volvo XC60 (2008-2017)

The first-generation Volvo XC60 (2008-2017) may display several transmission-related error codes that indicate potential issues within the transmission system. Below are some common error codes, their symptoms, diagnostic steps, tools required, and repair instructions.

Common Error Codes

P0720 - Output Speed Sensor Circuit Malfunction
P0740 - Torque Converter Clutch Circuit Malfunction
P0841 - Transmission Fluid Pressure Sensor/Switch A Circuit Range/Performance Problem
P0864 - Transmission Fluid Pump Performance
P0700 - Transmission Control System Malfunction

Tools Required

OBD-II Scanner
Multimeter
Transmission fluid pressure gauge
Basic hand tools (screwdrivers, wrenches)
Torque wrench
Vehicle service manual for specifications and torque values

Repair Instructions

P0720 - Output Speed Sensor Circuit Malfunction

Replace the Output Speed Sensor: If the sensor is faulty, remove the old sensor (usually located near the transmission output shaft) and install a new one.
Clear DTCs: Use the OBD-II scanner to clear the fault codes and test drive the vehicle to verify repair.

P0740 - Torque Converter Clutch Circuit Malfunction

Inspect the Wiring: Check for damaged or corroded wiring connected to the torque converter clutch solenoid.
Replace the Torque Converter Clutch Solenoid: If wiring is intact, replace the solenoid.
Check Fluid Levels: Ensure the transmission fluid is at the correct level and in good condition.

P0841 - Transmission Fluid Pressure Sensor Circuit Range/Performance Problem

Replace the Fluid Pressure Sensor: If faulty, remove and replace the fluid pressure sensor.
Inspect Electrical Connections: Ensure that all connections are secure and free from corrosion.

P0864 - Transmission Fluid Pump Performance

Check Fluid Level and Condition: Ensure that the transmission fluid is at the correct level and appears clean.
Replace the Transmission Fluid Pump: If the pump is malfunctioning, it may need replacement.

P0700 - Transmission Control System Malfunction

Check for Additional Codes: This code is typically a generic code indicating other issues; address specific codes found.
Inspect TCM Connections: Ensure that the TCM connections are secure and free from corrosion.
Reprogram the TCM: If needed, update or reprogram the TCM using a specialized Volvo diagnostic tool.

Conclusion

Regularly monitoring transmission performance and addressing any error codes promptly can significantly extend the life of your Volvo XC60’s transmission. Always refer to the vehicle’s service manual for specific torque values and detailed specifications when performing repairs. If the issue persists after repairs, consult with a professional technician for further diagnosis.