FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the service light on my Volvo XC60 First Generation (2008-2017) - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to reset the service light on my Volvo XC60 First Generation (2008-2017)

how to reset the service light on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
326 words

Problem Statement

Learn how to reset the service light on your Volvo XC60 (2008-2017) with this easy step-by-step guide. Ensure your maintenance reminders are cleared.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stable position while performing the reset.

Symptoms

  • •Service light illuminated on the dashboard
  • •Maintenance reminder message displayed
  • •No other performance issues reported

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Key fob for the vehicle

Parts Required

  • •None required for the reset process

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools such as the key fob.
  • Ensure the vehicle is in a safe location with the engine off.
2. Reset Service Light
  1. Insert the Key Fob

    • Place the key fob into the ignition.
  2. Press the Gas Pedal

    • Firmly press the accelerator pedal three times within 5 seconds while the key is in the "Off" position.
  3. Turn on the Ignition

    • Turn the ignition to the "On" position without starting the engine. The dashboard lights will illuminate.
  4. Check the Service Light

    • Observe if the service light on the dashboard turns off. If it does not, repeat the steps to ensure they were performed correctly.