how to reset the oil maintenance light in my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

406 words

Problem Statement

Learn how to reset the oil maintenance light on your Volvo XC60 First Generation (2008-2017) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface to prevent any movement during the reset process.

Symptoms

•Oil maintenance light remains illuminated on the dashboard
•Reminder for oil change appears on the display
•Vehicle performance may feel normal but maintenance alert persists

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Navigate to the 'Trip' menu using the left steering wheel controls.
3
Check the current odometer reading and ensure it displays correctly.
4
Turn off the ignition and wait 10 seconds.
5
Restart the vehicle and check if the oil maintenance light is still illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Navigate to the 'Trip' menu using the left steering wheel controls.
3
Check the current odometer reading and ensure it displays correctly.
4
Turn off the ignition and wait 10 seconds.
5
Restart the vehicle and check if the oil maintenance light is still illuminated.

Solution

1. Preparation

Gather the necessary tools and ensure the vehicle is parked on a level surface.
Ensure the ignition is in the "Run" position but do not start the engine.

Use the left steering wheel controls to navigate to the "Trip" menu.
Confirm that the odometer is displayed on the screen (not the trip meter).

3. Reset the Oil Maintenance Light

While in the "Trip" menu, press and hold the "Reset" button located on the end of the left steering wheel stalk.
While holding the "Reset" button, turn the ignition to the "Off" position, then back to "Run" without starting the engine.
Continue holding the "Reset" button until the oil maintenance light starts flashing and then turns off.

4. Verify Reset

Release the "Reset" button and check the dashboard to ensure that the oil maintenance light is no longer illuminated.
Start the engine to ensure all warning lights function correctly.