how to reset the oil change light in my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the oil change light in your 2008-2017 Volvo XC60 First Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park or neutral before performing the reset to prevent rolling.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder message displayed
•No other performance issues present

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Press the ignition button once to turn the electrical systems on without starting the engine.
3
Navigate to the trip computer using the left-side steering wheel controls.
4
Locate the 'Oil Life' or 'Service' menu on the display.
5
Select the option to reset the oil change light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required; the vehicle's controls are sufficient.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Press the ignition button once to turn the electrical systems on without starting the engine.
3
Navigate to the trip computer using the left-side steering wheel controls.
4
Locate the 'Oil Life' or 'Service' menu on the display.
5
Select the option to reset the oil change light.

Solution

1. Preparation

Ensure the vehicle is in a stationary position.
Make sure the ignition is off before starting the reset process.

2. Access Ignition

Insert the key fob into the ignition or press the start button without pressing the brake pedal.
Turn on the vehicle’s electrical system by pressing the start button once.

3. Navigate to the Oil Change Light Reset

Use the left steering wheel controls to scroll through the menu.
Find the "Trip" or "Service" option on the display.

4. Reset the Oil Change Light

Once the "Oil Life" or "Service" option is highlighted, press and hold the "OK" button or the center button on the steering wheel.
Continue holding until you see the message indicating that the oil change light has been reset.

5. Confirm Reset

Check the display for a confirmation message indicating the reset was successful.