how to reset the maintenance light on Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

383 words

Problem Statement

Learn how to reset the maintenance light on a 2008-2017 Volvo XC60. Step-by-step guide to clear the light after maintenance has been performed.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location with the ignition off before beginning the reset process.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Vehicle has recently undergone scheduled maintenance

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'OK' button on the steering wheel to access the menu display.
3
Navigate to the 'Car Status' option using the arrow buttons.
4
Select 'Maintenance' from the menu options.
5
Choose the 'Reset' option to clear the maintenance light.
6
Confirm the selection when prompted to complete the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the 'OK' button on the steering wheel to access the menu display.
3
Navigate to the 'Car Status' option using the arrow buttons.
4
Select 'Maintenance' from the menu options.
5
Choose the 'Reset' option to clear the maintenance light.
6
Confirm the selection when prompted to complete the reset.

Solution

1. Preparation

Ensure the vehicle is in park and the ignition is off.
Gather necessary tools: None required for this procedure.

2. Ignition Position

Insert the key and turn the ignition to the 'ON' position, but do not start the engine.
Ensure all accessories are off to avoid any interference.

Locate the "OK" button on the steering wheel.
Press the "OK" button to activate the car menu on the dashboard display.

4. Navigating to Maintenance Reset

Use the up and down arrow buttons on the steering wheel to scroll through the menu options.
Select "Car Status" and press "OK."
Scroll to the "Maintenance" option and press "OK."

5. Performing the Reset

Choose the "Reset" option from the maintenance menu.
Confirm the reset by selecting "Yes" when prompted.
The maintenance light should turn off, indicating the reset was successful.