how to reset the maintenance light on my Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

374 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 (2008-2017) with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for service due or overdue
•No engine performance issues

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key fob is outside the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Odometer' button on the dashboard until 'Trip' is displayed.
4
Hold down the 'Trip' button while turning the ignition to the 'OFF' position and then back to 'ON.'
5
Continue to hold the 'Trip' button until the maintenance light resets and the message disappears.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ignition key
•Key fob

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key fob is outside the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Press the 'Odometer' button on the dashboard until 'Trip' is displayed.
4
Hold down the 'Trip' button while turning the ignition to the 'OFF' position and then back to 'ON.'
5
Continue to hold the 'Trip' button until the maintenance light resets and the message disappears.

Solution

1. Preparation

Gather necessary tools:
- Ignition key or key fob
Ensure that any required service has been completed prior to resetting the maintenance light.

2. Resetting the Maintenance Light

Turn Off the Vehicle: Ensure the vehicle is completely turned off.
Insert Key and Turn to ON: Insert the ignition key and turn it to the "ON" position without starting the engine.
Select Odometer Display: Press and hold the "Odometer" button until the odometer reading changes to the trip distance.
Ignition Cycle: While holding the "Trip" button, turn the ignition back to "OFF."
Complete Reset: Turn the ignition back to the "ON" position while continuing to hold the "Trip" button. Wait for the maintenance light to reset, which typically takes a few seconds.