FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Volvo XC60 - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to reset the maintenance light on my Volvo XC60

how to reset the maintenance light on my Volvo XC60

Volvo XC60 First Generation (2008-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
364 words

Problem Statement

Learn how to reset the maintenance light on your Volvo XC60 with this step-by-step guide. Quick and easy instructions for a successful reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral and on a level surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Vehicle may show 'Service Required' message
  • •No other operational issues present; the vehicle runs normally

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically needed for reset

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe location with the engine off.
  • Gather necessary tools if needed (e.g., owner's manual for reference).
2. Reset the Maintenance Light

  1. Insert Key/Press Start Button

    • Insert the key into the ignition or press the start button without starting the engine.

  2. Locate Odometer/Reset Button

    • Find the odometer button, typically located on the dashboard cluster.

  3. Initiate Reset Process

    • Press and hold the odometer/reset button.

  4. Turn Ignition On

    • Turn the ignition key to the "ON" position or press the start button, but do not start the engine.

  5. Complete the Reset

    • Hold the button until the maintenance light begins to blink and then turns off, indicating the reset is complete.

  6. Release the Button

    • Once the light is off, release the odometer/reset button.