FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light in my Volvo XC60 First Generation (2008-2017)? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/how to reset the maintenance light in my Volvo XC60 First Generation (2008-2017)?

how to reset the maintenance light in my Volvo XC60 First Generation (2008-2017)?

Volvo XC60 First Generation (2008-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
371 words

Problem Statement

Learn how to reset the maintenance light on your 2008-2017 Volvo XC60. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No performance issues or error codes present
  • •Vehicle may have recently undergone maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key or key fob

Parts Required

  • •None required for the reset process

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure that the vehicle is parked safely and in the "OFF" position.
  • Have the key fob or ignition key ready.
2. Reset the Maintenance Light
  1. Insert the key into the ignition or press the start button to enter the accessory position (position II).
  2. Locate the trip/reset button on the instrument cluster; this is usually found near the speedometer.
  3. Press and hold the trip meter button for several seconds.
  4. While holding the button, turn the ignition to the "ON" position (not starting the engine).
  5. Continue to hold the trip meter button until the maintenance light blinks and then turns off, indicating that the reset is successful.
  6. Release the trip meter button and turn off the ignition.