how to diagnose C0035 code in Volvo XC60 First Generation (2008-2017)

Volvo XC60 First Generation (2008-2017)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

Error Code: C0035

3 min read

576 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix C0035 left front wheel speed sensor issues in Volvo XC60. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

C0035

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely supported before working underneath it.

Symptoms

•Check engine light illuminated
•ABS warning light activated
•Traction control warning light illuminated
•Erratic or inconsistent speedometer readings
•Increased stopping distance
•Vehicle stability issues during braking

Diagnostic Steps

1
Scan the vehicle’s computer using an OBD-II scanner to confirm the C0035 code and check for any additional codes.
2
Inspect the left front wheel speed sensor for physical damage or corrosion.
3
Check the wiring and connectors related to the left front wheel speed sensor for wear, fraying, or loose connections.
4
Measure the resistance of the wheel speed sensor using a multimeter to ensure it is within the manufacturer’s specified range.
5
Test the wheel speed sensor signal using an oscilloscope to verify it produces a proper output while the wheel is rotating.
6
Inspect the ABS module for any faults or internal issues that may have triggered the code.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Multimeter
•Torque wrench
•Electrical contact cleaner

Parts Required

•Left front wheel speed sensor (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s computer using an OBD-II scanner to confirm the C0035 code and check for any additional codes.
2
Inspect the left front wheel speed sensor for physical damage or corrosion.
3
Check the wiring and connectors related to the left front wheel speed sensor for wear, fraying, or loose connections.
4
Measure the resistance of the wheel speed sensor using a multimeter to ensure it is within the manufacturer’s specified range.
5
Test the wheel speed sensor signal using an oscilloscope to verify it produces a proper output while the wheel is rotating.
6
Inspect the ABS module for any faults or internal issues that may have triggered the code.

Solution

1. Preparation

Gather tools and parts required.
Ensure the vehicle is parked on a level surface and secured with wheel chocks.
Disconnect the negative terminal of the battery to prevent electrical shorts.

2. Inspect and Replace Wheel Speed Sensor

Remove the Wheel:
- Use a jack to lift the vehicle and secure it with jack stands.
- Remove the lug nuts with a socket set and take off the left front wheel.
Access the Wheel Speed Sensor:
- Locate the wheel speed sensor mounted on the left front wheel hub assembly.
- Remove any mounting bolts or clips holding the sensor in place.
Check Wiring and Connector:
- Inspect the wiring harness leading to the sensor. Look for any signs of wear or damage.
- If the connector is corroded, clean it with electrical contact cleaner.
Replace the Sensor (if faulty):
- Disconnect the old sensor from the wiring harness.
- Install the new sensor by reversing the removal steps.
- Ensure it is securely mounted and the connector is firmly attached.

3. Reassemble and Reconnect

Reattach the Wheel:
- Place the wheel back onto the hub and hand-tighten the lug nuts.
- Lower the vehicle and torque the lug nuts to the manufacturer’s specifications (typically around 80-100 ft-lbs).
Reconnect the Battery:
- Reconnect the negative terminal of the battery.
Clear Diagnostic Codes:
- Use the OBD-II scanner to clear the C0035 code from the vehicle’s computer.