FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot the engine not starting issue in my 2012 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I troubleshoot the engine not starting issue in my 2012 Volvo XC60?

How do I troubleshoot the engine not starting issue in my 2012 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
738 words

Problem Statement

Learn how to troubleshoot and resolve the engine not starting issue in your 2012 Volvo XC60 with step-by-step diagnostic and repair instructions.

Affected Component
engine starting system

Symptoms

  • •No Crank
  • •Cranking but No Start
  • •Dashboard Lights
  • •Clicking Noise

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II scanner
  • •Screwdrivers (flathead and Phillips)
  • •Socket set
  • •Wrench set
  • •Jumper cables
  • •Fuel pressure gauge (optional)
  • •Relay and fuse tester

Additional Information

Affected Component
engine starting system
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting Engine Not Starting Issue in a 2012 Volvo XC60

Tools Required

  • Multimeter
  • OBD-II scanner
  • Screwdrivers (flathead and Phillips)
  • Socket set
  • Wrench set
  • Jumper cables (for battery check)
  • Fuel pressure gauge (optional)
  • Relay and fuse tester
Step 1: Battery Condition Check

Step 2: Starter Motor Check

Step 3: Ignition System Check

Step 4: Fuel System Check

Step 5: Engine Management Diagnostics

  1. Scan for Trouble Codes:
    • Use an OBD-II scanner to check for any stored fault codes that may indicate specific issues (e.g., crankshaft position sensor failure).
    • Address any codes found, as they can point directly to the issue.
Repair Instructions

Battery Replacement

  1. Disconnect the negative terminal first, followed by the positive.
  2. Remove the old battery and install the new one, connecting the positive terminal first, followed by the negative.
  3. Test the new battery with a multimeter.

Starter Motor Replacement

  1. Disconnect the battery.
  2. Remove any components obstructing access to the starter.
  3. Unbolt the starter and disconnect the wiring.
  4. Install the new starter, reconnecting wiring and bolting it in place.
  5. Reconnect the battery and test.

Spark Plug and Ignition Coil Replacement

  1. Remove the engine cover (if applicable).
  2. Disconnect the electrical connectors from the ignition coils.
  3. Unscrew the ignition coils and pull them out.
  4. Replace spark plugs if necessary.
  5. Reinstall everything in reverse order.

Fuel Pump Replacement

  1. Drain fuel from the tank.
  2. Disconnect the battery.
  3. Remove the fuel tank from the vehicle (may require lowering the rear suspension).
  4. Replace the fuel pump assembly.
  5. Reinstall the tank and reconnect all lines and the battery.
Final Steps
  • After completing repairs, try starting the vehicle.
  • If the problem persists, consider consulting a professional technician for further diagnostics.

By following these steps, you can systematically troubleshoot and resolve the engine not starting issue in your 2012 Volvo XC60.