FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot the cruise control not engaging in my 2012 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I troubleshoot the cruise control not engaging in my 2012 Volvo XC60?

How do I troubleshoot the cruise control not engaging in my 2012 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
674 words

Problem Statement

Learn how to troubleshoot and fix cruise control issues in your 2012 Volvo XC60 with our step-by-step guide.

Affected Component
Cruise Control System
Estimated Time
2-4 hours

Symptoms

  • •The cruise control light on the dashboard does not illuminate.
  • •The cruise control system does not maintain speed when activated.
  • •The cruise control switch appears to be unresponsive.
  • •No error codes are displayed on the dashboard.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Basic hand tools (screwdrivers, socket set)
  • •Torque wrench
  • •Wiring diagram for cruise control system
  • •Diagnostic software (if available)

Additional Information

Affected Component
Cruise Control System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting Cruise Control Not Engaging in a 2012 Volvo XC60

Symptoms:

  • The cruise control light on the dashboard does not illuminate.
  • The cruise control system does not maintain speed when activated.
  • The cruise control switch appears to be unresponsive.
  • No error codes are displayed on the dashboard.
Tools Required:
  1. OBD-II Scanner
  2. Multimeter
  3. Basic hand tools (screwdrivers, socket set)
  4. Torque wrench
  5. Wiring diagram for cruise control system
  6. Diagnostic software (if available)

Step 1: Initial Inspection

  1. Check the Dashboard Light:

    • Turn on the ignition and check if the cruise control indicator lights up in the dashboard. If it does not, this could indicate an electrical issue.

  2. Inspect the Cruise Control Switch:

    • Ensure the cruise control switch on the steering wheel is not damaged or stuck. Look for any physical signs of wear or debris.

  3. Review Owner’s Manual:

    • Refer to the owner's manual for specific details regarding the cruise control system and any potential fuses associated with it.

Step 2: Fuses and Electrical System

  1. Check the Fuses:

    • Locate the fuse box (commonly under the dashboard or in the engine compartment).
    • Identify the cruise control fuse and inspect it for continuity. If the fuse is blown, replace it and test the cruise control again.

  2. Test the Switch:

    • Using a multimeter, check the continuity of the cruise control switch:
      • Remove the switch from the steering wheel.
      • Test the switch terminals for continuity when the switch is activated. If there is no continuity, replace the switch.

Step 3: Diagnostic Scan

  1. Use an OBD-II Scanner:

    • Connect the OBD-II scanner to the vehicle’s diagnostic port.
    • Check for any stored error codes related to the cruise control or engine management system.
    • Pay special attention to codes related to throttle position, brake switch, or vehicle speed sensors.

  2. Clear Codes:

    • If there are codes, note them down, clear them, and test the cruise control system again to see if the issue persists.

Step 4: Check Brake Switch

  1. Inspect the Brake Light Switch:

    • The cruise control system is disabled when the brake pedal is pressed. Check the brake light switch located near the brake pedal.
    • Ensure the switch is functioning correctly and that the brake lights illuminate when the pedal is pressed.

  2. Test for Continuity:

    • Use a multimeter to check if the brake light switch is sending a signal when the pedal is pressed. If not functioning, replace the brake light switch.

Step 5: Throttle Position Sensor

  1. Check Throttle Position Sensor (TPS):
    • The TPS can affect cruise control functionality. Monitor the sensor's voltage using a multimeter.
    • With the ignition on (engine off), check the voltage at the TPS wiring connector. It should vary as the throttle is moved. If it does not, replace the TPS.

Step 6: Speed Sensor Check

  1. Test Vehicle Speed Sensor:
    • The cruise control system requires an accurate speed signal. Test the vehicle speed sensor using a multimeter or an oscilloscope.
    • If the signal is erratic or nonexistent, replace the speed sensor.
Repair Instructions:

  1. Replace Faulty Components:

    • If any components (cruise control switch, brake switch, TPS, or speed sensor) were found to be faulty during the diagnostic steps, replace them with OEM parts for best compatibility.

  2. Reassemble:

    • After replacing any faulty components, reassemble the steering column and any other disassembled parts.

  3. Reconnect Battery:

    • Reconnect the vehicle's battery and clear any diagnostic codes stored in the ECU.

  4. Test Drive:

    • Take the vehicle for a test drive to confirm that the cruise control system is now functioning correctly.
Conclusion:

By following the above steps, you should be able to diagnose and resolve the issue with the cruise control not engaging in your 2012 Volvo XC60. If the problem persists after all checks and replacements, consider consulting a Volvo specialist for further diagnostics and repairs.