How do I reset the service message in my 2012 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes

easy

Difficulty

low

Severity

3 min read

455 words

Problem Statement

Learn how to reset the service message on your 2012 Volvo XC60 with detailed step-by-step instructions and no special tools required.

Affected Component

dashboard controls

Symptoms

•Service message or warning light illuminated on the dashboard
•Maintenance reminder notification after an oil change or service has been performed

Diagnostic Steps

1
Check Service Requirements: Ensure that the necessary maintenance has been performed (e.g., oil change, filter replacement)
2
Verify Dashboard Messages: Look for any additional warning lights or messages that may require attention before proceeding with the reset

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools are required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the Service Message in a 2012 Volvo XC60

If you're seeing a service message on your 2012 Volvo XC60, it typically indicates that your vehicle is due for maintenance or that the service interval has not been reset following a service. Below are detailed steps to reset the service message.

Tools Required

No specific tools are required for this process, as it can be done using the vehicle's dashboard controls.

Reset Instructions

Step 1: Turn on the Ignition

Insert the key fob into the ignition slot (if equipped) or press the start button without pressing the brake pedal.
Turn the ignition to the "ON" position (the dashboard lights should illuminate, but the engine should not start).

Step 2: Access the Trip Computer

Using the left-hand steering wheel controls, navigate through the dashboard menu.
Locate the trip computer or options menu. This may involve pressing the "OK" button or the scroll wheel to cycle through the menu options.

Step 3: Find the Service Message

Look for an option that indicates "Service" or "Service Message."
If the service message is displayed, select it using the "OK" button.

Step 4: Reset the Service Message

Once you have the service message on the screen, you should see an option to reset it (this may be labeled as “RESET,” “CLEAR,” or similar).
Confirm the reset action by selecting "YES" if prompted.

Step 5: Turn Off the Ignition

Turn the ignition off completely after the reset is confirmed.

Step 6: Verify the Reset

Restart the vehicle to ensure the service message is no longer displayed on the dashboard.
Check for any other warning lights that may be present.

Additional Notes

If the service message persists after following these steps, it may indicate that the service was not properly documented or that there is an underlying issue needing attention. In that case, consider consulting a professional technician or visiting a Volvo dealership for further diagnostics.
It’s a good practice to keep a record of all maintenance performed on the vehicle for your own reference and to assist with future service reminders.

By following these detailed steps, you should be able to successfully reset the service message on your 2012 Volvo XC60.