FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I reset the service light on a 2011 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I reset the service light on a 2011 Volvo XC60?

How do I reset the service light on a 2011 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
431 words

Problem Statement

Learn how to reset the service light on your 2011 Volvo XC60 after performing routine maintenance. Follow these easy steps to ensure your service reminder is cleared.

Affected Component
service light

Symptoms

  • •Service light remains illuminated after maintenance

Diagnostic Steps

  1. 1
  2. 2

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •A working key fob or key for the vehicle
  • •A flathead screwdriver (optional)

Additional Information

Affected Component
service light
Difficulty
easy
Severity
low
Tools Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Resetting the Service Light on a 2011 Volvo XC60
Tools Required
  • A working key fob or key for the vehicle
  • A flathead screwdriver (optional, for prying open the ignition if necessary)
Reset Instructions

Step 1: Prepare the Vehicle

  • Ensure that the vehicle is in a safe location with the engine off.
  • Close all doors and ensure the driver's side door is closed.

Step 2: Turn on the Ignition

  • Insert the key into the ignition or use the key fob.
  • Turn the ignition switch to the "ON" position (do not start the engine). This is typically the second position in the ignition switch.

Step 3: Access the Service Menu

  1. Locate the Trip Odometer Button: This is usually found on the dashboard, near the speedometer or as part of the instrument cluster.
  2. Press and Hold the Trip Odometer Button: While keeping the button pressed, you will proceed to the next step.

Step 4: Reset the Service Light

  1. Turn Off the Ignition: With the trip odometer button still held down, turn the ignition to the "OFF" position.
  2. Turn the Ignition Back On: Still holding the trip odometer button, turn the ignition switch back to the "ON" position.
  3. Wait for the Reset: After a few seconds, you will notice that the service light on the dashboard will start to blink and then turn off. Release the trip odometer button.

Step 5: Verify the Reset

  • Start the engine and check if the service light is no longer illuminated. This confirms that the reset was successful.
Conclusion

If the service light remains on after following these steps, it may indicate an underlying issue that requires further diagnosis. In that case, using an OBD-II scanner to check for any diagnostic trouble codes (DTCs) might be necessary.

Additional Tips
  • Always consult your vehicle's owner manual for specific instructions related to your model.
  • If you are unsure about performing the reset or suspect there are unresolved issues, consider consulting with a professional technician.