FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I reset the service light in a Volvo XC60 after maintenance? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I reset the service light in a Volvo XC60 after maintenance?

How do I reset the service light in a Volvo XC60 after maintenance?

Volvo XC60 First Generation (2008-2017)

Error Codes
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
491 words

Problem Statement

Learn how to reset the service light in your Volvo XC60 after maintenance with this easy step-by-step guide.

Affected Component
service light

Symptoms

  • •service light remains illuminated on the dashboard

Diagnostic Steps

  1. 1
  2. 2

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Key fob or ignition key
  • •A flat, non-scratch tool (optional)

Additional Information

Affected Component
service light
Difficulty
easy
Severity
low
Tools Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Resetting the Service Light in a Volvo XC60 (First Generation, 2008-2017)
Tools Required
  • Key fob or ignition key
  • A flat, non-scratch tool (optional, for easier access to the ignition)
Reset Instructions

Follow these detailed steps to reset the service light:

Step 1: Prepare the Vehicle

  • Ensure the vehicle is parked on a level surface and in the "Off" position.
  • Close all doors completely and ensure all accessories are turned off.

Step 2: Insert the Key

  • Insert the key into the ignition or place the key fob in the ignition slot.

Step 3: Turn on the Ignition

  • Turn the ignition key to the “II” position (do not start the engine). If using a key fob, press the Start button without pressing the brake pedal. The dashboard lights will illuminate.

Step 4: Access the Trip Computer

  • Locate the "Trip" button on the left stalk of the steering wheel (if applicable). This button may also be labeled as "OK" or "Reset," depending on the model.
  • Press the “Trip” button until you see the trip odometer display.

Step 5: Reset the Service Light

  • While the trip odometer is displayed, press and hold the "Trip" button.
  • Continue holding the button until you see the “Service” message on the display change to “Reset.” This typically takes about 10 seconds.
  • Release the button once the message changes.

Step 6: Confirm the Reset

  • The service light should turn off. If it does not, repeat the above steps.
  • Turn the ignition off and then back to the “II” position to verify that the service light is no longer illuminated.

Step 7: Test Drive

  • Start the engine and take the vehicle for a short drive to ensure that the service light does not reappear.
Additional Notes
  • If the service light remains on after following these steps, there may be additional issues that need to be diagnosed. Consider using an OBD-II scanner to check for any diagnostic trouble codes (DTCs).
  • Always consult your owner’s manual for specific instructions pertinent to your vehicle's model and year, as there may be slight variations.

By following these instructions, you should be able to successfully reset the service light in your Volvo XC60 after maintenance has been performed.