How do I reset the maintenance light on a 2013 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes

easy

Difficulty

low

Severity

3 min read

471 words

Problem Statement

Learn the straightforward process to reset the maintenance light on your 2013 Volvo XC60 after completing maintenance services.

Affected Component

maintenance light

Symptoms

•The maintenance light (often represented by a wrench icon) appears on the instrument cluster.
•Vehicle has undergone maintenance (oil change, filter replacement, etc.) and needs to reset the reminder.

Diagnostic Steps

1
Confirm Maintenance Completion: Ensure that the maintenance service has been performed (e.g., oil change, filter replacement).
2
Check for Additional Warning Lights: Make sure no other warning lights are illuminated on the dashboard that might indicate other issues requiring attention.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools are required.
•A key fob or the vehicle key is needed to turn on the ignition.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the maintenance light on a 2013 Volvo XC60 is a straightforward process that can be performed without special tools. Below are the detailed steps to accomplish this task.

Tools Required

No special tools are required.
A key fob or the vehicle key is needed to turn on the ignition.

Reset Instructions

Enter the Vehicle:
- Sit in the driver's seat and close all doors.
Turn on the Ignition:
- Insert the key into the ignition or press the start button without pressing the brake pedal (if equipped with keyless ignition).
- Turn the key to the 'On' position (not starting the engine) or press the start button once.
Navigate to the Trip Computer:
- Use the buttons on the steering wheel or the dashboard to navigate through the menu on the instrument cluster.
- Look for the menu that shows "Trip" or "Settings".
Locate the Service Reminder:
- Find the service reminder option (this may vary based on the software version).
- Select the option that allows you to reset the service interval or maintenance light.
Reset the Service Light:
- Once you are in the service reminder menu, look for an option to "Reset" or "Clear" the maintenance light.
- Confirm the reset by pressing the necessary button (usually "OK" or "Enter").
Exit the Menu:
- After confirming the reset, exit the menu by pressing the back button or navigating out of the settings.
Turn Off the Ignition:
- Turn the ignition off completely and remove the key (or turn off the start button).
Verify Reset:
- Reinsert the key and turn on the ignition again.
- Check the instrument cluster to ensure that the maintenance light is no longer illuminated.

Final Check

After resetting, take the vehicle for a short drive to confirm that the warning light remains off.
If the maintenance light remains on, double-check the previous steps or consult the owner's manual for any model-specific instructions.

Additional Notes

If the maintenance light keeps returning, consider checking other maintenance intervals or consult a professional technician for further diagnosis.
Regular maintenance checks are crucial for vehicle longevity and performance, so ensure all services are performed as recommended by Volvo.

Following these steps should successfully reset the maintenance light on your 2013 Volvo XC60.