FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the windshield wipers not working in my 2012 Volvo XC60? - Volvo XC60
Home/Cars/Volvo/XC60/First Generation (2008-2017)/How do I fix the windshield wipers not working in my 2012 Volvo XC60?

How do I fix the windshield wipers not working in my 2012 Volvo XC60?

Volvo XC60 First Generation (2008-2017)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
651 words

Problem Statement

Learn how to diagnose and repair windshield wipers not working on your 2012 Volvo XC60 with step-by-step instructions.

Affected Component
windshield wipers
Estimated Time
2-3 hours

Symptoms

  • •Windshield wipers do not operate at any speed (off, intermittent, low, or high)
  • •Wipers may be stuck in a fixed position
  • •Wiper washer spray may not function
  • •No sound from the wiper motor when activated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdrivers (flathead and Phillips)
  • •Socket set
  • •Torque wrench (if needed)
  • •Replacement parts (fuse, relay, wiper motor)

Additional Information

Affected Component
windshield wipers
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Windshield Wipers Not Working on a 2012 Volvo XC60

Tools Required
  • Multimeter
  • Fuse puller or needle-nose pliers
  • Screwdrivers (flathead and Phillips)
  • Socket set
  • Torque wrench (if needed)
  • Replacement parts (fuse, relay, wiper motor)
Repair Instructions
Step 1: Inspect and Replace the Fuse

  1. Locate the Fuse:

    • Open the fuse box according to the owner's manual.
    • Identify the wiper fuse.

  2. Remove the Fuse:

    • Use a fuse puller or needle-nose pliers to carefully remove the fuse.

  3. Test the Fuse:

    • Check if the filament inside is broken. Replace it with a new fuse of the same amperage if necessary.
Step 2: Replace the Wiper Relay

  1. Locate the Relay:

    • Find the wiper relay in the fuse box.

  2. Remove and Replace:

    • Pull out the relay from its socket.
    • Insert a new relay of the same specifications.
Step 3: Testing and Replacing the Wiper Motor

  1. Access the Wiper Motor:

    • Remove the wiper arms by unscrewing the nuts at their bases.
    • Remove the cover panel (if applicable) to expose the motor.

  2. Disconnect the Motor:

    • Unplug the electrical connector from the wiper motor.

  3. Test the Motor:

    • Use a multimeter to check for voltage at the connector while operating the switch.
    • If voltage is present but the motor does not run, it’s likely faulty.

  4. Replace the Motor:

    • Unscrew the wiper motor from its mount.
    • Install the new motor in reverse order of removal.
    • Reconnect the electrical connector.
Step 4: Reassemble and Test

  1. Reattach Wiper Arms:

    • Place the wiper arms back onto their mountings and secure them with the nuts.

  2. Reconnect Battery (if disconnected):

    • If you removed any battery connections, reconnect them now.

  3. Test the Wipers:

    • Start the vehicle and test the wipers in all settings to ensure they function correctly.
Step 5: Final Inspection
  • Verify that the wipers operate smoothly without any unusual noises.
  • Check for proper alignment and make any necessary adjustments to the wiper arms.

By following these structured steps, you should be able to diagnose and repair the windshield wipers on your 2012 Volvo XC60 effectively. If issues persist after these repairs, further diagnostics may be required, potentially involving the vehicle's body control module or other electronic components.